To Next PageTo Next Page
Need help?Do you have a question about the Alpine TDA-7547E and is the answer not in the manual?
General| Sub Preamp Output | Yes |
|---|---|
| Key Button Color | Green |
| USB Input | Yes |
| Built-in Equalizer | Yes |
| Bluetooth | No |
| CD Player | Yes |
| AM/FM Tuner | Yes |
| RMS Power Bandwidth | 20Hz - 20kHz |
| Memory Presets | 18 |
| Frequency Response | 20Hz - 20kHz |
| Compatible Audio Formats | MP3, WMA, AAC |
Important safety warnings for operation and use of the unit.
Important cautionary notes for operation and use of the unit.
Guidelines for operating the unit within specified temperature ranges.
Instructions for handling tape slack, thin tape, and precision mechanisms.
Guidance on replacing fuses and seeking professional service.
Specifies unsuitable locations and precautions for the detachable front panel.
Step-by-step instructions for safely removing the front panel.
Step-by-step instructions for securely reattaching the front panel.
Procedure for initializing the unit after installation or power application.
Describes the automatic setup feature for optimal performance.
Instructions for operating the power switch and Non Fading Pre-Out.
How to activate or deactivate the loudness feature for enhanced sound.
Guide to adjusting volume, bass, treble, balance, and fader.
How to activate and use the demonstration mode for product features.
Steps for manually tuning radio stations by frequency.
How to automatically search for and tune to radio stations.
Instructions for switching between mono and stereo reception.
Guide to manually saving radio stations into memory.
How the unit automatically stores station presets.
Instructions for storing stations into the D.A.P. band.
How to select previously stored radio stations.
How to view entered station titles in place of frequency.
Steps for naming stored radio stations with custom titles.
How to find stations using their titles via the Title Search Menu.
Procedures for loading and removing cassettes from the player.
How to play a cassette tape normally, including auto-reverse.
Using Dolby B NR for noise reduction on encoded tapes.
How to play a cassette track or entire tape repeatedly.
Instructions for fast forwarding and rewinding tapes.
How to skip blank sections on a tape automatically.
How to play the first 10 seconds of each program on a tape.
How to manually change the tape playback direction.
Listening to radio while tape fast forwarding or rewinding.
Using the program sensor to navigate tape selections.
How to control an optional CD shuttle connected to the unit.
Using the music sensor to skip tracks on a CD.
How to fast forward or rewind within CD tracks.
How to repeat playback of tracks or entire CDs.
How to enable random playback of tracks or CDs.
How to play the first 10 seconds of each track on a CD.
How to view entered CD titles in place of track information.
Steps for entering custom titles for CDs.
How to find discs using their titles via the Title Search Menu.
Steps for removing entered CD titles.
How to select CD shuttles in a multi-changer system.
How to activate optional audio processors like Equalizer or Divider.
How to show the current time on the unit's display.
Instructions for setting the clock time accurately.
Overview of the remote control buttons and their basic functions.
Guide to replacing the remote control battery.
Troubleshooting initial power-on issues after installation.
Troubleshooting common radio reception and tuning problems.
Troubleshooting common tape playback issues like dull sound.
Troubleshooting common CD shuttle operation issues.
Explains CD shuttle error indications and their solutions.
Technical specifications for the FM and AM tuner sections.
Technical specifications for the tape player section.
Specifications for the remote control, including battery and size.
General technical specifications, chassis, and nosepiece dimensions.
