Alpine 7619R - Page 5

FEATURES
FULL FRONT DIN™ CHASSIS
CD SHUTTLE™ CONTROL
DYNAS SYSTEM
The DYNAS is an entirely new radio reception system which eliminates radio
interference caused by adjacent channejs and improves usable sensitivity in FM
broadcasting reception. Consequently, with the DYNAS system switch turned ON,
some broadcasting stations which are difficult to be received because of adjacent
.channel interference can be clearly heard with a conventional tuner.
Q.R.B. (QUICK RELEASE BRACKET)
GR-HIGH PRECISION/LOW NOISE FULL LOGIC
WIRELESS REMOTE CONTROL
The 7619R comes equipped with a wireless remote control that can control cassette,
tuner and CD Shuttie™ functions.
1D. (INTERACTIVE DISPLAY)
Interactive Display uses an alpha-numeric dot matrix screen to acknowledge the
commands received and display other pertinent information.
HLTAC I1™ TAPE HEAD
Alpine's proprietary HLTAC II tape head features Oxygen Free Copper (OFC) coil
windings to prevent low level signal loss and corrosion. It also features a
super-close-tolerance, extremely narrow 0.8 micron head gap for exceptionally flat and
accurate frequency response.
P.S. (PROGRAM SENSOR)
Program Sensor allows skipping up to 9 tracks on the tape in either forward or reverse
directions.
A.P.1. (AUTO PROGRAM IDENTIFICATION)
While A.P.1. function turns on in the FM mode, a best receptive RDS station which has
same program as the station you are receiving automatically can be received.
T. INFO (TRAFFIC INFORMATION)
While T. INFO function turns on, a traffic information service automatically can be
received when a station transmit.
D.A.P. (DIRECT ACCESS PRESETS)
A. MEMO (INTELLIGENT AUTO MEMORY)
REPEAT (TAPE, CD)
SCAN (TAPE, CD)
BLANK SKIP
DOLBY* B/C NOISE REDUCTION
S.T.M. (SOURCE TONE MEMORY)
Automatically memorizes the settings of your Bass/Treble Controls for each source.
DUAL PRE-AMP OUTPUTS
Dual pre-amp outputs, along with a pre-amp fader, make easy and complete system
expansion possible.
LITETOUCH™ 30-STATION PRESETS
FM1:6, FM2: 6, MW: 6, LW: 6, D.A.P.: 6
Dolby noise reduction manufactured under license from Dolby Laboratories Licensing
Corporation. “DOLBY” and the double-D symbol ( 01) are trademarks of Dolby
Laboratories Licensing Corporation.
CONTROLS AND INDICATORS
55S SS8S5SSS9 98S 8998 889899888499 GS689S80O0O08080
fore) \\iasie Row Vlei?) (ey-Wne) sts
Auto Program Identification Button
Traffic INFOrmation/DX (Lecal/Distance) Button
Eject Button
Cassette Loading Slot
T. INFO Indicator
A.P.1. Indicator
Dot Matrix Display
Dolby B/C NR Indicator
RDS Indicator
RePeaT Indicator
Blank Skip Indicator
DYNAS Indicator
Tape Direction Indicator (Reverse)
Tape Direction Indicator (Forward)
ALL Indicator
LouDness Indicator
Return EJect Indicator
A. MEmory Indicator
SEEK Indicator
Demonstration DISPlay Button
PROGram//M.1.X./DYNAS Button
Preset and Direct Disc Access No. 3/P.S. UP Button
Preset and Direct Disc Access No. 6/P.S. DN Button
Preset and Direct Disc Access No. 2/Dolby C NR Button
Preset and Direct Disc Access No. 5/Return EJECT Button
Preset and Direct Disc Access No. 1/Dolby B NR Button
Preset and Direct Disc Access No. 4/Blank SKIP Button
D.A.P. (Direct Access Preset)/SCAN Button
REPEAT Button
DISC (Play p /Pause 11) Button
TAPE (Play > /Pause I!) Button
TUNER/BAND Button
UP/FF Switch ( p>)
TUNE Switch
DN/REW Switch ( < )
POWER On/Off Switch (PUSH)
Sensor Window for Remote Control
Audio MODE Select Switch/Volume up down/LOUDness Button
CoNTRaST Control
Reset Switch
M.I.X. Indicator
TP Indicator
Preset No./Disc No. Indicator
DX Indicator
STereo Indicator
Digital Display
Band/Track No. Indicator
D.A.P. Indicator