Alpine A110 2023 - Activating Cruise Control

CRUISE CONTROL
2
124 - Driving
Switching on
Press the switch 1 on the side.
The warning light appears in
green accompanied by dashes to
indicate that the cruise control function
is activated and waiting to store a
cruising speed.
Activating cruise control
At a steady speed above
approximately19mph(30km/h),
press the switch 2 on side a (+): the
function is activated and the current
speed is stored.
The cruising speed replaces the
dashes and cruise control is confirmed
by the appearance of the cruising
speed in green and the warning light
.
If you try to activate the function below
19 mph (30 km/h), the function will
remain inactive.
Driving
Once a cruising speed is memorised
and the cruise control function is
active, you may lift your foot off the
accelerator pedal.
Please note that you
must keep your feet
close to the pedals in
order to react in an
emergency.
Adjusting the cruising speed
The cruising speed can be changed by
pressing the switch 2 repeatedly:
– on side a (+) to increase the speed;
– on side b (-) to decrease the speed.