ACCESSING THE ENGINE, LEVELS
4
150 - Maintenance
Closing the bonnet
To close the bonnet again, hold the
bonnet in the middle and guide it until
it is in the closed position
(movement
B
). Apply pressure to the
bonnet at
2
until it locks.
Do not lean on the
bonnet: there is a risk
that the bonnet may
accidentally close.
Vehicles not fitted with
storage compartment
A
Due to the presence of
mechanical components:
– it is forbidden to store objects
under the bonnet;
– when working on the engine
compartment, ensure that you do
not leave anything (cloths, tools,
etc.) Otherwise, this may lead to
the mechanical components
being damaged or cause a fire.
Risk of damage or fire;
– When working in the engine
compartment, the mechanical
components may be hot. The
engine cooling fan may also start
at any moment.
Risk of injury.
Before carrying out any
work under the bonnet,
the ignition must be
switched off (please see
"Starting, stopping the engine" in
Section 2).
To Next Page
Loading...