ACCESSING THE ENGINE, LEVELS
4
156 - Maintenance
Refitting the scuttle panel grille run
channel
It is important to properly reposition the
run channel
1
.
To do this:
– position the run channel
1
(movement
D
);
– depending on the vehicle, insert the
run channel
1
into the wing cover
housing
7
(movement
E
);
– clip on the component
6
on each
end of the run channel to the bodywork
mounting
5
(movement
F
);
– press the run channel (movement
G
) to clip it in.
Note: if you have difficulty clipping
in the run channel
1
(movement
G
),
check if it has been inserted into
components
5
and
7
: risk of
damage to run channel.
To Next Page
Loading...