STANDING START PROCEDURE
2
Driving - 95
It is forbidden to launch a
standing start procedure
during the running in period
of your vehicle (risk of engine
deterioration).
For more information on running
in, please refer to the information
on "Running in" in Section 2.
The function is
programmed for a
maximum number of 1,000
or 1,500 uses, depending on the
vehicle. Beyond this limit, the
function will be permanently
deactivated.
To view the remaining number of
uses, please contact an
authorised dealer.
Note: the use of this function
significantly accelerates tyre
wear. Refer to "Tyres" in Section
5.
Because of the
acceleration gained, this
function should only be
used if traffic conditions
permit, and in compliance with the
local driving regulations.
Please ensure all the conditions
are met before each use.
Risk of accident or serious
injury.
To Next Page
Loading...