EasyManua.ls Logo

Alpine CDA-117Ri - CD;MP3;WMA;AAC Playback Operations; Basic Playback and Repeat Play; M.I.X. (Random Play) Function

Alpine CDA-117Ri
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13-EN
Playback
1
Press (OPEN).
The front panel will open.
2
Insert a disc with the label side facing up.
The disc will be pulled into the unit automatically.
Note
When a disc is already inserted, press SOURCE to switch to the
DISC mode.
3
While playing back MP3/WMA/AAC, press or to select
the desired folder.
Pressing and holding or will change folders continuously.
4
Press or to select the desired track (file).
Pressing and holding or will fast backward/fast
forward track continuously.
Note
If a song is fast reversed to its beginning in pause mode, the song will be
played back automatically.
5
To pause playback, press .
Pressing again will resume playback.
6
After pressing (OPEN) to open the front panel, press
to eject the disc.
Notes
Do not remove a CD during its eject cycle. Do not load more than one
disc at a time. A malfunction may result from doing either.
Three-inch (8 cm) CDs cannot be used.
WMA format files that are protected by DRM (Digital Rights
Management), AAC format files that have been purchased from iTunes
Store and files that are copy-protected (copyright protection) cannot be
played back on this unit.
The track display for MP3/WMA/AAC data playback is the file
numbers recorded on the disc.
The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
•Press VIEW to switch the display. For details, refer to “Displaying the
Text on page 19.
Repeat Play
1
Press 4.
The song is played back repeatedly.
RPT
*1
RPT
*2
RPT
*3
(off) RPT
*1 Only a track/file is repeatedly played back.
*2 Only files in a folder are repeatedly played back (MP3/WMA/
AAC mode only).
*3 A disc is repeatedly played back (When a CD changer is
connected.).
Notes
If RPT is set to ON during M.I.X. play in CD changer mode, M.I.X.
will apply to the current disc only.
If a CD changer or an MP3 compatible CD changer is connected: Press
FUNC. to select the desired function (RPT/M.I.X.). Perform this
operation within 5 seconds.
2
To cancel repeat play, select (off) with the above
procedure.
M.I.X. (Random Play)
1
Press 5 .
The songs are played back in random sequence.
MIX
*1
MIX
*2
MIX
*3
(off) MIX
*1 The tracks are played back in random sequence (CD mode
only).
*2 Only files in a folder are played back in random sequence (MP3/
WMA/AAC mode only).
*3 For CD, the tracks on all the CDs in the current magazine will
be included in the random playback sequence. (When a CD
changer equipped with the ALL M.I.X. function is connected.);
For MP3/WMA/AAC, files are played back in random
sequence. If an MP3 compatible CD changer is connected, all
files in a disc are played back in random sequence, and playback
shifts to the next disc.
Note
If M.I.X. is set to ON during RPT (REPEAT ALL) play in CD
changer mode, M.I.X. will apply to the current disc only.
2
To cancel M.I.X. play, select (off) with the above procedure.
Note
If a CD changer or an MP3 compatible CD changer is connected: Press
FUNC. to select the desired function (RPT/M.I.X.). Perform this
operation within 5 seconds.
CD/MP3/WMA/AAC
FUNC.
(OPEN)
Rotary encoder/ENTER/
/ESC
SOURCE/
VIEW
4
5

Table of Contents

Other manuals for Alpine CDA-117Ri

Related product manuals