20-EN
When displaying Text, the following indicators are lit according to the
mode.
Text compatible CDs contain text information such as the disc name and
track name. Such text information is referred to as “text”.
Notes
• Some characters may not be displayed correctly with this device,
depending on the character type.
• The CD changer must also be CD Text compatible for the Text
information to be displayed.
• If there is no TEXT information, the display is blank.
• The text or tag information may not be correctly displayed, depending
on the contents.
Displaying Time
1
Press VIEW repeatedly until the time is displayed.
Each press changes the display.
For details, refer to “Displaying the Text” on page 19.
Note
• Selecting any tuner or CD function while in the clock priority mode will
interrupt the time display momentarily. The function selected will be
displayed for about 5 seconds before the time returns to the display.
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, General Setting, Display Setting, etc. can
be modified.
1
Press and hold SETUP for at least 2 seconds to activate the
SETUP mode.
2
Turn the Rotary encoder to select the desired item, and
then press ENTER.
Bluetooth
*1
General Display Tuner Bluetooth
(e.g. Select General)
3
Turn the Rotary encoder to select a setting item, and then
press ENTER.
(e.g. Select Power IC)
Bluetooth:
Bluetooth IN
General:
Birthday Set Clock Mode Clock Adjust
*2
Calendar
Play Mode Beep INT Mute
*3
AUX+ Setup AUX+
Name
*4
AUX IN GAIN
*4
Digital AUX D.AUX Name
*5
AUX IN AUX Name
*6
Power IC Language Set Demo
Steering Birthday Set
Display:
Illumination Dimmer Level Scroll Type Text Scroll
Font Select BGV Select Opening MSG Illumination
Tuner:
RDS Regional
*7
PI Seek
*8
Alert PTY31
*9
Auto Clock
*10
FM Level FM Tuner Set RDS Regional
*1 Displayed only when INT Mute is OFF and the mode is set to
other than Bluetooth Audio.
*2 Refer to “Setting the Time and Calendar” on page 8.
*3 Displayed only when Bluetooth IN is OFF.
*4 Displayed only when AUX+ Setup is ON.
*5 Displayed only when Digital AUX is ON.
*6 Displayed only when AUX IN is ON.
*7 Refer to “Receiving RDS Regional (Local) Stations” on page 10.
*8 Refer to “PI SEEK Setting” on page 10.
*9 Refer to “Setting PTY31 (Emergency Broadcast) reception” on
page 10.
About the indication display
Indicator/
Mode
CD Mode
MP3/WMA/AAC
Mode
iPod Mode
—
Folder Name
being displayed
—
—
Artist Name
being displayed
Artist Name
being displayed
—
Album Name
being displayed
Album Name
being displayed
—
File Name
being displayed
—
Text (Disc
Name) being
displayed
——
Text (Track
Name) being
displayed
Song Name
being displayed
Song Name
being displayed
About “Text”
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
SETUP
/ESC
SOURCE/
BAND/TA
Rotary encoder/ENTER/
To Next Page
Loading...
