46-EN
Playing MP3 Files with the CD Changer
(optional)
If you connect a changer compatible with MP3, you can play CD-ROMs,
CD-Rs, and CD-RWs containing MP3 files on this unit.
1
Press SOURCE to switch to the CHANGER mode.
2
Press ENTER to activate the search select mode.
3
Turn the Rotary encoder to select the Disc Search, and
then press ENTER.
4
Turn the Rotary encoder to select the desire disc in the CD
Changer.
5
To pause playback, press .
Pressing again will resume playback.
Notes
• The unit can play discs containing both audio data and MP3 data.
• For operating MP3 with an MP3 compatible CD Changer, refer to “CD/
MP3/WMA/AAC” on page 14.
Multi-Changer Selection (optional)
Alpine’s Ai-NET system will support up to 6 CD Changers. When
operating two or more changers, the KCA-400C (Multi-Changer
Switching device) must be used. If you use 1 Switching device, you can
connect up to 4 CD Changers. If you use 2 Switching devices, you can
connect up to 6 CD Changers. When using KCA-410C (Versatile Link
Terminal), you can connect two changers and two external outputs
(AUX).
1
Press SOURCE on this unit to activate the CHANGER
mode.
Alternatively, press SOURCE on the remote control (RUE-4202)
to activate the CHANGER mode.
2
Press BAND to activate the Changer Selection mode.
The Changer Selection mode remains active for several seconds.
3
Press BAND until the desired Changer indicator appears
on the display.
Notes
• If the selected CD Changer is not connected, the display will show “NO
CHANGER-(No.)”.
• To operate the selected changer, refer to “CD/MP3/WMA/AAC” on
page 14.
• For further details about the external input (AUX) when using
KCA-410C, refer to “Setting the AUX Mode (V-Link)” on page 23.
Controls on Remote Control
Source Button
Press this button to select the audio source.
Volume Adjustment Buttons
To increase the volume level:
Press the button
To decrease the volume level:
Press the button
Button
Radio mode:
Pressing this button will select, in ascending order, stations
programmed into the radio’s presets as shown below.
...
CD Changer mode:
DISC Select (UP) button.
Press this button to select a disc in ascending order.
MP3/WMA/AAC mode:
Folder Select (UP) button.
Press this button to select the folder.
MP3 compatible CD changer mode:
Folder Select (UP) / DISC Select (UP) button. Press this button to
select a folder in ascending order. Press and hold this button to
select a disc in ascending order.
iPod mode:
Switches Playlist/Artist/Album/Genre/Composer.
DN Button
Radio mode:
SEEK (DN) Button.
CD/iPod mode:
Press this button to go back to the beginning of the current track.
Button
Press this button to switch between the Play and Pause modes for
CD.
SOURCE
BAND
Remote Control
To Next Page
Loading...
