EasyManua.ls Logo

Alpine CDE-110 - Specifications; Radio and CD Player Specifications; USB, AUX, and General System Specs

Alpine CDE-110
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Specifications
FM RADIO SECTION
AM RADIO SECTION
CD PLAYER SECTION
USB SECTION
Front AUX input
GENERAL
Ř Due to continuous product improvement, specifications and design
are subject to change without notice.
Tuning Range
(CDE-110C/110E/110UB) / (CDE-110)
Usable Sensitivity 5 dB/μV (S/N 30 dB)
Frequency Response 30-15,000 Hz (±3 dB)
Alternate Channel Selectivity 75 dB
Stereo Separation 30 dB
Image Rejection Ratio 70 dB
IF Rejection Ratio 100 dB
Signal-to-Noise Ratio 62 dB
Tuning Range
Usable Sensitivity 28 dB/μV (S/N 20 dB)
Sampling Range 8 times oversampling
DA Converter 1 bit DAC System
Pick-up Type 3-beam Photo
Detector Pick
Up
Light Source Semiconductor laser
Wave length 790 nm
Laser Power CLASS I
Frequency Response 20-20,000 Hz (±1 dB)
Signal-to-Noise Ratio 96 dB
Total Harmonic Distortion 0.01% (at 1 kHz)
Wow & Flutter Below measurable limits
Channel Separation 85 dB
USB requirements 1.1/2.0 Full Speed
Maximum Supply Compatibility 500 mA
Input Impedance 10 kohms
Allowable external input 2.0 V
mm 5.3rotcennoC Stereo mini-pin
Power Requirement 12 V DC (11-16 V allowable),
Test volage 14.4 V, Negative
ground
Current Consumption Less than 2.1 A (CD mode;
0.5 W x 4)
Maximum Power Output 50 W × 4 (at 1 kHz)
volume control maximum
Power Output 18 W x 4 (1kHz, 1 %, 4
ohms)
Speaker Impedance 4-8 ohms
Pre-Output Voltage* 2 V (CD mode, 1 kHz, 0dB)
Pre-Output Impedance* 200 ohms
Dimensions (W × H × D) 178 × 50 × 160 mm
gk 2.1thgieW
M
(CDE-110C/110E/110UB) / (CDE-110)
531-1,602 kHz / 530-1,710 kHz
87.5-108.0 MHz / 87.7-107.9 MHz

Other manuals for Alpine CDE-110

Related product manuals