EasyManua.ls Logo

Alpine CDE-123R - Searching by Artist Name; Searching by Explorer (FILE NAME) Mode (Flash Memory Only); Repeat Play

Alpine CDE-123R
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25-EN
*1 A maximum of 1,000 songs for one bank can be stored according to
the order stored in Flash Memory/Portable audio player. However,
song stored order in bank may differ from the song order in the Flash
Memory device/Portable audio player in some case.
*2 Playlist search is not available when a Portable audio player is
connected.
For example:
Searching by Artist name
The following example explains how an Artists search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
Searching by artist name
1
Press ENTER to activate the search selection mode.
2
Turn the Rotary encoder to select a desired Bank, and
then press ENTER.
“BANKING” may be displayed for a few seconds.
3
Turn the Rotary encoder to select the Artist search mode,
and then press ENTER.
PLAYLIST ARTIST ALBUM SONG GENRE COMPOSER
FOLDER FILE PLAYLIST
4
Turn the Rotary encoder to select the desired Artist, and
then press ENTER.
5
Turn the Rotary encoder to select an album, and then
press ENTER.
6
Turn the Rotary encoder to select a song and press
ENTER.
The selected song is played back.
Before performing the following procedures, make sure FILE NAME is
selected in “Setting the USB Search Mode” (refer to “Setting the USB
Search Mode” on page 23).
Flash Memory can contain hundreds of songs. By organizing songs by
folder, you can quickly find a desired folder/file. This operation is
similar to search a folder/file from PC.
1
Press ENTER to activate the search mode.
2
Turn the Rotary encoder to select a desired folder/file.
When a folder is searched, indicator lights up.
When a file is searched, indicator lights up.
3
Press ENTER to play the selected file or enter the
selected folder.
Press and hold ENTER for at least 2 seconds to play back all
songs in the selected folder.
4
Repeat steps 2 to 3 until the desired folder/file is found
when a folder is entered in step 3.
Notes
When a portable audio player is connected, even though FILE NAME is
set in “Setting the USB Search Mode” (refer to “Setting the USB Search
Mode” on page 23), the Tag information search mode will be applied.
In the Tag search mode, after pressing and holding ENTER for at
least 2 seconds while in each hierarchy (except Song and File hierarchy),
all songs of the selected hierarchy are played back.
Even if the songs belong to the same playlist, they may be saved as
different BANK.
After selecting [ALL] in the Tag search mode with
*
”, press and hold
ENTER for at least 2 seconds to play back all songs in the selected
search mode.
While in the search mode, if you press and hold for at least
2 seconds, or no operation is performed for 60 seconds, the search mode
is cancelled.
The root folder of Flash Memory/Portable audio player is displayed as
“\ROOT”.
When the bank is changed during Repeat play, the Repeat play will be
cancelled.
In the search mode, pressing will return to the previous mode.
When search is made during M.I.X. play, the M.I.X. play mode will be
cancelled.
If any one of the preset buttons (1 through 6) is pressed in the
search mode, a search can be made quickly by skipping to the specified
location. For details, refer to “Direct Search Function” on page 28.
In the Tag search mode, a search can be made quickly by Alphabet skip
function to find the desired artist or song, etc. For details, refer to
Alphabet Skip Function (Tag search mode only)” on page 26.
In the Explorer (FILE NAME) search mode, a search can be made
quickly by USB Skip function to find the desired folder/file. For details,
refer to “Setting the USB Skip function” on page 23.
When searching for a song, artist, etc., in Flash Memory, the display
order may be incorrect if the character code of the file tag information is
mixed.
Repeat Play
1
Press a 4.
The song is played back repeatedly.
When a song is searched by Tag information
a
*1
a
*2
a
*3
(off) a
When a folder/file is searched by Explorer (FILE NAME) mode (Flash
Memory only)
a
*1
a
*4
(off) a
*1 Only a file is repeatedly played back.
*2 According to the artist information of the current song, a playlist
about all the songs with the same artist of the Bank are made
into a playlist, which then starts to play back.
*3 According to the album information of the current song, a
playlist about all the songs with the same album of the Bank are
made into a playlist, which then starts to play back.
*4 Only files in a folder are repeatedly played back.
2
To cancel repeat play, select (off) with the above
procedure.
Note
During repeat play, setting M.I.X. to ON will cancel the repeat play.
Bank
*1
File———
Searching by Explorer (FILE NAME) mode
(Flash Memory only)
Hierarchy
1
Hierarchy
2
Hierarchy
3
Hierarchy
4
Hierarchy
5

Table of Contents

Related product manuals