EasyManua.ls Logo

Alpine CDE-148EBT - Product Specifications; Tuner, CD Player, and Pickup Specifications; USB, Bluetooth, and General Specifications

Alpine CDE-148EBT
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
43-EN
Specifications
FM TUNER SECTION
AM TUNER SECTION
CD PLAYER SECTION
PICKUP
USB SECTION
BLUETOOTH SECTION
PICKUP
GENERAL
CHASSIS SIZE
NOSEPIECE SIZE
Note
Due to continuous product improvement, specifications and design are
subject to change without notice.
Tuning Range 87.5~108.0 MHz
Mono Usable Sensitivity 9.3 dBf (0.8 µV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio 65 dB
Stereo Separation 35 dB
Capture Ratio 2.0 dB
Tuning Range 531~1,602 kHz
Sensitivity (IEC Standard) 22.5 V/27 dB
Frequency Response 5~20,000 Hz (±1 dB)
Wow & Flutter (% WRMS) Below measurable limits
Total Harmonic Distortion 0.008% (at 1 kHz)
Dynamic Range 95 dB (at 1 kHz)
Signal-to-Noise Ratio 105 dB
Channel Separation 85 dB (at 1 kHz)
Wave length 795 nm
Laser power CLASS I
USB requirements USB 1.1/2.0
Max. Power Consumption 1,000 mA
USB Class Mass Storage
File System FAT 12/16/32
MP3 Decoding MPEG AUDIO Layer-3
WMA Decoding Windows Media
Audio
BLUETOOTH Specification BLUETOOTH V2.1+EDR
Output Power +4 dBm Max. (Power class 2)
Profile HFP (Hands-Free Profile)
HSP (Head Set Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
Wave length 795 nm
Laser power CLASS I
Power Requirement 14.4 V DC
(11~16 V allowable)
Maximum Power Output 50W × 4
Maximum Pre-Output Voltage 4 V/10 k ohms
Bass ±9.1 dB at 100 Hz
Treble ±9.1 dB at 10 kHz
Loudness 10 dB at 100 Hz
Weight 1.4 kg (3 lbs. 1 oz)
Width 178 mm (7")
Height 50 mm (2")
Depth 161.5 mm (6–3/8")
Width 170 mm (6–3/4")
Height 46 mm (1–13/16")
Depth 25 mm (1")
00ALPINE.book Page 43 Friday, January 11, 2013 10:01 AM

Table of Contents

Related product manuals