Alpine CDE-193BT - Bluetooth Audio Operation

36-EN
Bluetooth Audio Operation
With a Bluetooth compatible Smartphone or music player, it’s possible to
play and control music playback wirelessly
*
.
* To play back audio, a Smartphone or a portable player conforming to
A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/
Video Remote Control Profile) is required.
Not all functions work with all devices.
Notes
• Set BT IN to ON when you want to use Bluetooth Audio function. Refer
to “Setting the Bluetooth Connection (BT IN)” on page 31.
• During a call, sound on the Bluetooth audio source is muted.
• If you operate the Hands-free phone (e.g. searching in the phone book)
while using the Bluetooth Audio function, Bluetooth Audio playback
may be affected.
Press V/SOURCE to select the BT AUDIO mode.
Press  or  to select the desired Song.
Pressing and holding  or  will fast backward/fast
forward track continuously.
Note
• The action depends on the paired device.
Press .
A playback stops. Pressing again will resume a playback.
Press  or  to select the desired Group.
Note
• This function is not available on all paired devices.
Artist name, album name, etc., may be searched and displayed during
playback or pause.
1 Press ENTER to activate the search mode.
2 Turn the Rotary encoder to select the desired Group
(Folder), and then press ENTER.
3 Turn the Rotary encoder to select the desired album,
folder, etc., within the selected Group (Folder), and then
press ENTER.
4 Repeat step 3 if necessary until the desired song is found.
Notes
• Search mode may differ depending on the paired device.
• The pause mode may be cancelled after the search.
• This function may not available depending on the paired device.
Playback MP3/WMA/AAC/FLAC Files from USB
Memory (optional)
If a USB Memory device is connected to the unit, MP3/WMA/AAC/
FLAC files can be searched and played back.
1 Press VSOURCE to select the USB AUDIO mode.
2 To pause playback, press .
Pressing  again will resume playback.
Notes
• This unit plays back files in USB Memory with the same controls and
modes used for playback of CDs containing MP3/WMA/AAC. For
details, refer to “CD/MP3/WMA/AAC (CDE-193BT only)” on page 14.
• Before disconnecting USB Memory, be sure to change to another source
or set to pause.
• The playback time may not be correctly displayed when a VBR
(Variable Bit Rate) recorded file is played back.
Recalling the Bluetooth Audio Mode
Selecting the desired Song
Pausing
Selecting the desired Group
Searching for a desired song
USB Memory (optional)
/SOURCE
USB Memory
(sold separately)
or
USB Memory
(sold separately)
Cable (sold
separately)