Alpine CDE-196DAB - Setup Menu Configuration; General Setup Options

29-EN
Setting
You can flexibly customize the unit to suit your own preferences and
usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting,
etc., can be modified.
1 Press and hold YSETUP for at least 2 seconds to
activate the SETUP mode.
2 Turn the Rotary encoder to select the desired item, and
then press ENTER.
AUDIO
*1
 GENERAL  DISPLAY  TUNER  iPod  APP 
BLUETOOTH
*2
(e.g. Select GENERAL)
GENERAL:
AUTO CLOCK  CLOCK ADJ
*3
 PWR CLOCK  MENU LANG
 AUX SETUP  AUX NAME
*4
 INTERRUPT  PLAY MODE
*5
 STAY ON  DEMO MODE  STEERING  OPENING
DISPLAY:
ILLUMINATI  DIMMER  DIMM LEVEL
*6
 TEXTSCROLL 
SCROLLTYPE
TUNER:
AF
*7
 REGIONAL
*8
 PI SEEK
*9
 FM SET  DAB DISP 
FM SWITCH  DAB LINK  DAB ANT  WEATHER 
SPORTS  PTY31  NEWS  TRAVEL  WARNING 
EVENT  SPECIAL  RADIO INFO  FINANCE
iPod:
iPod LIST
APP:
ALPINE APP  TTS VOLUME
*1 Refer to “Sound Setting” on page 19.
*2 Refer to “Bluetooth SETUP” on page 36.
*3 Refer to “Setting Time” on page 10.
*4 Displayed only when AUX SETUP is set to ON.
*5 CDE-196DAB only.
*6 Not displayed when “DIMMER” is set to “OFF”.
*7 Refer to “Turning AF (Alternative Frequencies) ON/OFF” on
page 12.
*8 Refer to “Receiving RDS Regional (Local) Stations” on page 12.
*9 Refer to “PI SEEK Setting” on page 12.
3 Select an Item with the Rotary encoder, and then press
ENTER.
(e.g. Select AUX SETUP)
4 Turn the Rotary encoder to change the setting, and then
press ENTER.
(e.g. Select ON or OFF)
5 Press and hold YSETUP for at least 2 seconds to return
to normal mode.
Notes
•Press t to return to the previous mode.
• If no operation is performed for 60 seconds, the unit will return to
normal mode automatically.
GENERAL is selected on the setup main menu in step 2.
Setting the Time to automatically be adjusted
When ON is selected, the clock is adjusted automatically based on the
time data sent from the RDS broadcast.
 Setting item: AUTO CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
To adjust it manually.
ON:
Adjust the clock automatically based on the time data.
Turning the Clock Display ON/OFF
 Setting item: PWR CLOCK
Setting contents:
OFF / ON (Initial setting)
OFF:
Clock of the PowerOff does not display.
ON:
Clock of the PowerOff displays.
Setting the Menu Language
Set the language to be displayed on the unit. Seven types of font can be
selected.
 Setting item: MENU LANG
Setting contents:
ENGLISH (Initial setting) / RUSSIAN / GERMAN / FRENCH /
SPANISH / ITALIAN / DUTCH
Note
• The Owner’s Manual only describes the setup menu display when
ENGLISH is set.
Setting the AUX SETUP mode
You can input the audio of an external device, (such as a Portable audio
player) to the AUX connector of this unit.
 Setting item: AUX SETUP
Setting contents:
OFF / ON (Initial setting)
OFF:
When set to OFF, AUX source cannot be selected.
SETUP
Use steps 1 to 5 to select one of the SETUP modes to modify.
See the applicable section below for details about the
selected SETUP item.
/SETUP
/ENTER

DIM.


6
/SOURCE
Rotary encoder
General Setting