EasyManua.ls Logo

Alpine CDE-196DAB - Setting the DAB Antenna ON;OFF (DAB ANT); Receiving Weather Information; Receiving Sports Information; Setting PTY31 (Emergency Broadcast) Reception

Alpine CDE-196DAB
54 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33-EN
Setting the DAB Antenna ON/OFF (DAB ANT)
You can choose whether to supply power to DAB Antenna Connector by
this setting. Confirm the type of DAB antenna (sold separately) before
installing the DAB antenna. If an active antenna that needs power supply
from this unit is used, set DAB ANT to ON; if a passive antenna that
does not need power supply from this unit is used, make sure to set DAB
ANT to OFF, otherwise, a malfunction may occur.
Setting item: DAB ANT
Setting contents:
OFF (Initial setting) / ON
OFF:
When no DAB Antenna is connected or the connected DAB
Antenna does not need power supply from this unit.
ON:
When the connected DAB Antenna needs power supply from this
unit.
Receiving weather information
When ON is set, this unit will broadcast the weather information from
DAB/DAB+/DMB.
Setting item: WEATHER
Setting contents:
OFF (Initial setting) / ON
OFF:
Weather information will not be heard.
ON:
Weather information is heard when it is broadcasting.
Receiving sports information
When ON is set, this unit will broadcast the sports information from
DAB/DAB+/DMB.
Setting item: SPORTS
Setting contents:
OFF (Initial setting) / ON
OFF:
Sports information will not be heard.
ON:
Sports information is heard when it is broadcasting.
Setting PTY31 (Emergency Broadcast) reception
Turn PTY31 (Emergency Broadcast) reception ON/OFF.
Setting item: PTY31
Setting contents:
OFF / ON (Initial setting)
OFF:
Emergency Broadcasts will not be received.
ON:
Emergency broadcasts are received regardless of source. “ALARM”
is displayed during reception.
Note
When an emergency broadcast is received, the volume level will be
automatically changed to the memorized level in the traffic information
mode. For details, refer to “Receiving Traffic Information” on page 12.
Priority News
This function allows you to preset to give priority to the News
programme. When ON is set, the PRIORITY NEWS mode is activated.
Setting item: NEWS
Setting contents:
OFF / ON (Initial setting)
OFF:
PRIORITY NEWS mode is not used.
ON:
The unit automatically gives priority to the News programme
whenever it begins broadcasting, and interrupts the programme
you are currently listening to. The “NEWS” is displayed during
reception.
Note
This feature is functional when your unit is set to a mode other than the
LW and MW modes.
Receiving Transport information
Turn Transport information reception ON/OFF.
Setting item: TRAVEL
Setting contents:
OFF / ON (Initial setting)
OFF:
Transport information will not be received.
ON:
Transport information is heard when it is broadcasting.
Receiving Warning/Service information
Turn Warning/Service information reception ON/OFF.
Setting item: WARNING
Setting contents:
OFF / ON (Initial setting)
OFF:
Warning/Service information will not be received.
ON:
Warning/Service information is heard when it is broadcasting.
Receiving Event Announcement information
Turn Event Announcement reception ON/OFF.
Setting item: EVENT
Setting contents:
OFF / ON (Initial setting)
OFF:
Event Announcement information will not be received.
ON:
Event Announcement information is heard when it is
broadcasting.
Receiving Special Event information
Turn Special Event reception ON/OFF.
Setting item: SPECIAL
Setting contents:
OFF / ON (Initial setting)
OFF:
Special Event information will not be received.
ON:
Special Event information is heard when it is broadcasting.

Table of Contents

Other manuals for Alpine CDE-196DAB

Related product manuals