6-EN
Displaying Time
1 Press the DISP button repeatedly until the clock
time is displayed.
Each press changes the modes as follows:
Radio mode
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display.
Basic Operation
g DN f UP
Rotary encoder
(CDM-7874)
SOURCE
CDM-7874: CD Player and Changer modes
CDE-7872/CDE-7870: CD Player mode
Setting the AUX Mode
(CDM-7874 only)
You can input TV/video sound by connecting an
optional "M-Bus V-Link" (M-Bus/RCA interface
cable KCM-122B) to this component.
1 Press and hold the SETUP button for at least 3
seconds.
2 Press the g DN or f UP button to select
the AUX mode.
3 Press the BAND button to toggle the mode
between AUX ON and AUX OFF.
4 Press the SETUP button to return to normal
mode.
5 To adjust the volume, etc., first press the
SOURCE button and select the AUX mode, then
make the necessary adjustment.
NOTE
When AUX ON is selected, a CD Changer cannot be used.
→ TUNER → CD → AUX
Playing time
mode
Clock priority
mode
→→
→
Track No.
mode
→
Playing time
mode
→
Clock priority
mode
Radio frequency
↔
Clock priority
mode
BAND
BASS C. SETUPDISPTREBLE C.
(CDE-7872/CDE-7870)
11
11
1
22
22
2
CENTER f
g DN f UP
DISP
BAND
To Next Page
Loading...
