36
English
English/Français/Español
Cause and Solution
• Protective circuit is activated due to high
temperature.
– The indicator will disappear when the
temperature returns to within operation
range.
• No magazine is loaded.
– Insert a magazine.
• Malfunction in the unit.
– Press the eject button and remove the
CD from the CD magazine. Inspect the
CD for any deformities or irregularities. If
there appears to be no problems with the
disc, insert the CD back into the
magazine. When the "E-01" indication
disappears from the display, insert the
magazine into the unit.
If the magazine does not eject, consult
your Alpine dealer.
• Magazine ejection not possible.
– Press the magazine eject button. If the
magazine does not eject, consult your
Alpine dealer.
• Magazine ejects without CD.
– Press the eject button to activate the
eject function. Insert an empty CD
magazine into the CD Shuttle to receive
the disc left inside the unit.
If the CD cannot be removed, consult
your Alpine dealer.
• Misconnection or disconnection of CD
Shuttle.
– Check connection between CD Shuttle
and control unit.
Indication/Indication/Indicación
English
Indication for CD
Shuttle
– – – H
T
E-01
EEEE
To Next Page
Loading...
