Alpine CRA-1656SP User Manual

10
English
CD Operation
English
Basic Operation
1
1
1
1
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
1
POWER
PWR
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
(Remote Control Unit/
Unité de télécommande/
Unidad de control
remoto)
(Remote Display Unit/Unité
d'affichage de télécommande/
Unidad de visualizador de
control remoto)
Initial System Setup
Immediately after installing or applying power to
the unit, it should be initialized. Using a sharp
pencil or other pointed object, press the Reset
button.
Turning Power On and Off
Press the POWER button to turn on the unit.
The unit displays the Changer mode.
Note: The Remote Display Unit can be turned
on by pressing any button.
Press the POWER button for at least 3 seconds
to turn off the unit.
Notes:
• Once you are sure all connections are
proper, you may turn the unit on.
• "FREQ." on the upper side of the PWR
button of the remote control unit is not used
to set the modulator frequency.
POWER
PWR

Alpine CRA-1656SP Specifications

General

Brand	Alpine
Model	CRA-1656SP
Category	Controller
Language	English