Alpine ERE-G180 - Specifications

Specifications
Power Supply DC14.4V (11~16V)
Total Harmonic Distortion (2Vrms/Channel) wee 0.1%
Input Sensitivity (Ref. 2V Output)/Impedance 043dB/10k ohm
Output Impedance we 1K ohm
‘S/N Ratio (IHF-A) BBE OFF : 90dB
BBE ON : 85dB
Frequency Response (Ref. 1kHz, 30Hz~30kHz) 0+1dB
Channel Crosstalk Attenuation 60dB
Current Drain (2V/Channel) 550mA
Fader Control Effect 50¢B
Equalizer Band
Frequency Shaping Equalizer Controls
, 63, 125, 190, 250, 500, 1k, 2.2k, 4.5k, 9k, 18kHz
Boost : 11+3, -6dB
Cut : -11+3, -6dB
Channel Unbalance 0+3dB
Subwoofer Cut-off Frequency Response (20Hz, 2V Output, Ref. -3dB) 42+10Hz, 150+25Hz
Subwoofer Control Effect (at 20Hz, Input 200mV) 15+30dB
21 IC's, 36 Transistors, 17 Diodes, 5 Zener Diodes, 1 FET
Chassis : 178X25X 115mm.
Nose : 178X25X 17mm
0.64kg
Semi-Conductors
Dimensions (WX H XD)
Weight
NOTE : Due to Continuing product improvement, specifications and designs are subject to change without notice.
'18C