Adjust the front-back position
of
the
Display
unit (Optional)
Depending on
the
vehicle,
it
may be necessary
to
adjust the front-
back position
of
the Display
unit
when
mounting
it.
If
front-back position adjustment
is
necessary, set the slider
to
the
back position before
mounting
the
display
unit
to
the vehicle.
[Default setting: forward position]
~
WARNING
MAGNETIC
SCREWDRIVER
REQUIRED
TO
CAREFULLY
REMOVE
SCREWS.
1 Remove 4 flush head screws from
the
Top and Bottom
of
the
main unit.
Flush
head
screw
Flush
head
screw
2
Push
the
slider
to
the
back position
(To
return
the
slider
to
the
forward position, pull
it
forward).
T
4-EN
3 Tightly fix
the
slider using
the
4 screws
that
were
removed in Step 1.
Flush
head
screw
Flush
head
screw
Mounting
the
Microphone
______
~
For safe
use,
make sure
of
the
following:
• Location
is
stable and firm.
• Does
not
interfere
with
safety equipment.
• Driver's view and operations are
not
obstructed.
• Microphone
is
located where
the
driver's voice can be easily
picked
up
(for example, on
the
sun visor).
When you speak
into
the
microphone, you should
not
have
to
change
your driving posture. This may cause a distraction, taking your
attention away from safely driving your vehicle. Carefully consider
direction and distance while
mounting
the microphone. Confirm
that
the
driver's voice can be easily picked
up
at
the
selected location.
To Next Page
Loading...
