EasyManua.ls Logo

Alpine iLX-W670A - Getting Started; Unit Controls and Basic Operations

Alpine iLX-W670A
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9-EN
Getting Started
Location of Controls
When system is powered o ,Short/long touch any button to turn the
power on.
A
/ (DOWN/UP) button
Touch to adjust the volume.
Touch and hold this button for at least 1.7 second to adjust the
volume to maximum or minimum
B
(MUTE) button
• Touch to activate/deactivate the mute mode.
• Touch and hold this button for at least 1.7 second to display
on/o
C
(HOME)/(Power O) button
Activates the HOME screen.
Touch and hold this button for at least 1.7 second to turn the
power o.
D
(Phone) button
Activates the Phone screen.
E
button
• When phone is connected to CarPlay, touch this button to
activate Siri
• When phone is connected to Android Auto ,touch this button
to activate VR
• When Siri is activated, the function of Siri is available
• When VR is activated, the VR setting is ON and the function of
VR is available
• When the CarPlay/Android Audio is disconnected ,the
operation in this button is invalidate
• When CarPlay/Android Audio is disconnected, touch and
long hold to enter into the Device Searching List to activate
the new device searching
E
(Reset) button
Reset& Restart.
About the button descriptions used in this Owner’s
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. (HOME)). The buttons found on the touch-screen display
are shown in bold within brackets, [ ] (e.g. [ ]).
Turning Power On or O
Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Turn the ignition key to the ACC or ON position.
The system turns on.
•
When turned on, the system displays the last screen that was
displayed before the ignition key was turned o. For example,
if the unit is in radio mode when ignition is turned o, it will
remain in radio mode when ignition is turned back on.
2
Touch and hold the (HOME)/(Power O) button for
at least 1.7 second to turn the power o.
•
When the system is used for the rst time, the language selection menu
is displayed. Select the desired language, and then touch [OK].
•
e unit can be turned on by touching the [ ] (HOME) button,
[ ] button [ ] button [ ] button or [ ] (Phone) button.
•
e unit is a precision device. Careful handling of the unit should
provide you with years of trouble-free operation.
Turning the System On
When the system is used for the rst time, the language selection menu
is displayed.
Select a language, and then touch [OK].
•
Some of this unit’s functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply the
parking brake before attempting these operations.
Adjusting the Volume
Adjust the volume by touching /
Volume decreases increases continuously by touching and holding
/
Volume: 0 - 35
Lowering Volume Quickly
Audio Mute function instantly lowers the volume level to 0.
1
Touch the (MUTE) button to activate the MUTE mode.
The audio level will be 0.
2
Touching the (MUTE) button again will bring the
audio back to its previous level.

Table of Contents