Alpine INE-W611D - Bluetooth System Information and Reset; Viewing Info, Setting Passkey, and Resetting

64 -EN
Viewing Bluetooth System Info
This feature is used to change the Bluetooth vehicle name and
system information.
1
In the Bluetooth Settings screen, touch [Bluetooth
Information].
Setting the Passkey
This feature allows you to change the passkey used for Bluetooth
device authentication.
1
In the Bluetooth Settings screen, touch [Passkey].
2
Enter the passkey and touch [OK]
The phone call is started.
• The default passkey is 0000.
Resetting Bluetooth Settings
This feature is used to restore all Bluetooth settings back to default
state.
1
In the Bluetooth Settings screen, touch [Reset].
2
Touch [Reset]
→
[Yes].