English
152
Audio Processor
Operation (Optional)
↑
↓
6
↑
Rotate the rotary encoder clockwise or
counterclockwise to adjust the Cross-Over point
upward or downward to your desired point.
7
When the adjustment has been completed,
press the FUNC (RETURN) button. The display
returns to the Divider mode screen.
8
RETURN
↓
Press the rotary encoder and select the channel
that you wish to adjust.
Each press changes the channel as follows.
When only one 2-way divider is connected:
→ Low → F-High → R-High
When two 2-way dividers are connected:
→ Low → High
Each time the 6 (F/R) button is
pressed, the mode switches between
the Front adjustment and Rear adjust-
ment modes, and the display also
changes.
→ Low → High
When only one 3-way divider is connected:
→ Low → Mid-L → Mid-H → High
When two 3-way dividers are connected:
→ Low → Mid-L → Mid-H → High
Each time the 6 (F/R) button is
pressed, the mode switches between
the Front adjustment and Rear adjust-
ment, and the display also changes.
→ Low → Mid-L → Mid-H → High
To Next Page
Loading...
