Alpine IVA-C800R - Manual Storing of Station Presets

44
English
Radio Operation
Tune in a desired radio station you wish to store
in the preset memory by manual or automatic
seek tuning.
Press the FUNC (PAGE 1/2) button.
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds. The Function Guide indicators in the
display, P.SET1 through P.SET6, will blink for 5
seconds.
2
1
While the P.SET1 through P.SET6 indicators in
the display are blinking, press the Function
button into which you wish to store the station
(within 5 seconds). The indicators in the display
stop blinking, showing that the station has been
memorized at the Preset button pressed.
3
PAGE 1/2
Manual Storing of Station
Presets
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW or LW).
4
Repeat the above procedure (1 to 3) to store up
to 5 other stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
Note: If a preset memory has already been set
in the same Function button, it will be
cleared and the new station will be
memorised.
P.SET 1 P.SET 2 P.SET 3 P.SET 4 P.SET 5 P.SET 6
P.SET 1 P.SET 2 P.SET 3 P.SET 4 P.SET 5 P.SET 6
1
23