English
168
Audio Processor
Operation (Optional)
Select one of the factory preset characteristic
curves or make your own (personal) character-
istic curve. Then, display the Audio Processor
List and select "Private Memo."
1
Press and hold any one of the Function buttons
1 (P.SET1) through 6 (P.SET6) for at least 2
seconds.
The Function Guide indicators P.SET1 through
P.SET6 in the preset mode display blink
indicating that you can memorise the character-
istic curve.
2
P.SET 1 P.SET 2 P.SET 3 P.SET 4 P.SET 5 P.SET 6
Memorising Characteris-
tic Curves
Equalisation characteristic curves created by
yourself or factory preset can be stored in
memory. (See pages 122 to 124.)
While the Function Guide indicators are
blinking, press the Function button 1 (P.SET1)
through 6 (P.SET6) into which you wish to
memorise the characteristic curve.
Now, the characteristic curve has been
memorised.
Repeat this procedure to memorise other
characteristic curves.
Note: This unit can memorise curves together
with the settings of the equaliser, DHE,
BBE and Surround Time Correction.
3
P.SET
1
P.SET
2
P.SET
3
P.SET
4
P.SET
5
P.SET
6
1
23
To Next Page
Loading...
Need help?
General
