58
EnglishEnglish
RDS Operation
Receiving Traffic
Information
Press the RDS button.
The display changes to the RDS setting screen.
1
Press the 4 (T.INFO) button to turn on the
Traffic Information mode.
2
T.INFO
Press the 1 (g) or 3 (f) button and
select the desired traffic information station.
When the traffic information station is tuned in,
the TP indicator lights up.
Traffic information is heard only when it is being
broadcast. If traffic information is not being
broadcast, the unit is set in the standby mode.
When a traffic information broadcast begins, the
unit automatically receives it and the display
shows "Traffic Info."
When traffic information broadcast is over, the
unit will automatically set in the standby mode.
Press the FUNC (RETURN) or RDS button to
return to the radio mode screen.
RETURN
3
4
or
(To be continued)
4 2 3
13
To Next Page
Loading...
