43-EN
Sending a standardized sentence
You can select a standardized sentence when you send a mail.
1
Press and hold the Rotary encoder for more than
2 seconds.
The Speed Dial display appears.
2
Press 7 (RETURN).
The Telephone menu display appears.
3
Pres the 6 (SMS WRITE).
The Standardized sentences are displayed.
4
Turn the Rotary encoder to select your desired
sentence.
5
Press the Rotary encoder.
The Send menu display appears.
6
Press either 1 (PHONE BOOK) to 3 (DIRECT
CALL) of the Function Guide to select the address.
To send from the PHONE BOOK or the CALL LOG
7
In the phone book display or the call log display,
turn the Rotary encoder to select the address.
Then press the Rotary encoder to enter it.
The select display appears.
8
Press 1 ( ) to send.
The SMS send display appears, and the mail is sent.
To send from the DIRECT CALL
7
In the direct call display, turn the Rotary encoder
to select the number. Then press the Rotary
encoder to enter it.
8
Press 1 (CALL).
The SMS send display appears and the mail is sent.
•To reply by REPLY of “SMS (Short Message Service) Operation”
(page 42), press 6 (SEND) on the Send menu display to send.
• If TEL mode is canceled by power off, etc., in the middle of making
a short message, the unfinished message is not saved.
To Next Page
Loading...
