Alpine IVA-D901 - Power and Parking Brake Connections; Parking Brake Lead Connection; SPST Switch Wiring Diagram

70-EN
BATTERY
IGNITION
FOOT BRAKE
PARKING BRAKE
Parking Brake Lead Connection
If necessary, use a pinch connector to connect the foot brake lead, parking brake lead, etc.
Connection Diagram of SPST Switch (Sold Separately)
(If the ACC power supply is not available)
• If your vehicle has no ACC power supply, add an SPST (Single-Pole, Single-Throw) switch (sold separately) and fuse (sold separately).
• The diagram and the fuse amperage shown above are in the case when IVA-D901 is used individually.
• If the switched power (ignition) lead of the IVA-D901 is connected directly to the positive (+) post of the vehicle‘s battery, the IVA-D901 draws
some current (several hundred milliamperes) even when its switch is placed in the OFF position and the battery may be discharged.
Foot Brake Lead / Parking Brake Lead Connection
IVA-D901
Tuner Box
(Yellow/Black)
(Yellow/Blue)
Pinch
Connector
Foot brake lamp
Foot brake lead
Parking brake lamp
Parking brake lead
Foot brake switch
Battery
Chassis
Parking brake switch
IVA-D901
(Monitor and
Tuner Box)
(Red)
(Yellow)
SPST SW (Optional)
Battery
12
Vehicle Cable
Stopper
Monitor Cable
Pinch Connector
Pliers
Pinch
Connector
FUSE (5A)
(Optional)
FUSE (25A) (Optional)