38-EN
Adjusting the External Input Audio Level
Further Setting item: Level
Setting contents: Low / High
• For AUX1, this setting item is adjustable only when AUX1 IN is set to
ON.
• For AUX2, this setting item is adjustable only when AUX2 IN is set to
AUX.
Switching the Visual Input Signal System
Further Setting item: Signal
Setting contents: NTSC/PAL / Auto
• The video input type can be changed.
• When set to Auto, unstable display may occur while playing back
certain black and white video signal. In this case, select NTSC or
PAL mode manually.
• For AUX1, this setting item is adjustable only when AUX1 IN is set to
ON.
• For AUX2, this setting item is adjustable only when AUX2 IN is set to
AUX.
You can input the audio of an external device (such as a Portable audio
player) to the Front AUX Input Terminal of this unit.
Setting item: AUX Front
Setting contents: ON / OFF
• When OFF is selected, the setting related to AUX Front source
cannot be changed from this unit.
After setting this item to ON, touch the title bar of AUX Front, the
following further setting item can be adjusted.
Adjusting the Front AUX Input Audio Level
Further Setting item: Level
Setting contents: Low / High
• This setting item is adjustable only when AUX Front is set to ON.
Outputs the picture/Sound of the source selected on the IVE-W530
connected to the rear monitor.
Setting item: AUX Out
Setting contents: OFF / ON
Setting item: BLUETOOTH IN
Setting contents: OFF / HFP / HFP+Audio
• For details on BLUETOOTH operation, refer to “BT Hands Free
Calling” on page 39.
Low: Decreases the external input audio level.
High: Increases the external input audio level.
Setting the AUX Front Mode
ON: AUX Front source is displayed.
OFF: AUX Front source is not displayed.
Low: Decreases the front aux input audio level.
High: Increases the front aux input audio level.
Setting the Picture/Sound Output
OFF: The “Rear” item is not displayed on the SOURCE select
screen.
ON: The “Rear” item is displayed on the Source Selection
screen.
Touch [Rear] to change to the REAR select screen, and
then touch the desired source. The selected source
picture is output on the rear monitor.
Setting the BLUETOOTH Connection
(BLUETOOTH IN)
OFF: Select to ignore any external interrupts.
HFP: Select when you want to pair your BLUETOOTH
compatible phone with this unit.
HFP+Audio: Select when you want to use BLUETOOTH Audio
function.
To Next Page
Loading...
