59-EN
Playback
1
Press
SOURCE to activate mode switching
screen.
2
Slide the display horizontally with your finger to
select Audio/Visual mode.
Each time you slide the display, the mode switches
circularly in the following order :
Audio/Visual Navigation Camera Telephone
Multi Info Audio/Visual
3
Slide the display vertically with your finger, or press
SOURCE repeatedly to select iPod source.
4
Press /ENTER.
The iPod source is activated and the display changes to the
iPod main screen.
5
Touch [ ] or [ ] to select the desired song.
Return to the beginning of the current song:
Tou ch [ ].
Fast backward the current song:
Touch and hold [ ].
Advance to the beginning of the next song:
Touch [ ].
Fast forward the current song:
Touch and hold [ ].
6
To pause playback, touch [ / ].
Touching [ / ] again will resume playback.
• If a song is playing on the iPhone/iPod when it is connected to the
iXA-W404, it will continue playing after the connection.
• If you listen to an episode from a selected podcast or audiobook, the
episode can be changed by touching Episode [
] or [ ].
• An episode may have several chapters. The chapter can be changed
by pressing [
] or [ ].
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
iXA-W404. Therefore, a maximum of 250 characters is
recommended. The maximum number of characters for the head unit
is 128 (128 byte).
• Some characters may not be correctly displayed.
• “NO SUPPORT” is displayed when text information is not
compatible with the iXA-W404.
Searching for a desired Song
An iPhone/iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the iXA-W404 can use these to ease song
searches.
Using the search mode’s individual hierarchy, you can narrow down
your search as shown in the table below.
<MUSIC Search Menu>
• You can select your preferred search mode. Refer to “iPod Search
Mode Setting” (page 18).
• Video search mode depends on the iPhone/iPod. If the specification
of the iPhone/iPod is changed, the search mode on this unit will also
be changed.
For example: Searching by Artist name
The following example explains how an Artists search is performed.
Another search mode can be used for the same operation, although the
hierarchy differs.
1
Touch [ ].
The search mode is activated, and the search list screen
appears.
• Touching [ ] for at least 2 seconds will return to last search mode.
2
Touch [Music].
The Music search menu screen is displayed.
• If Video mode is selected, the Video playlists/Movies/Music Videos/
TV Shows/Video Podcasts search mode may be used depending on
the connected iPhone/iPod. (only for iPhone or iPod compatible
video)
3
Touch the title of Artists.
The Artists search screen is displayed.
4
Select the desired artist.
Hierarchy 1 Hierarchy 2 Hierarchy 3 Hierarchy 4
Playlists Songs — —
Artists* Albums* Songs —
Albums* Songs — —
Songs — — —
Podcasts Episodes — —
Genres* Artists* Albums* Songs
Composers* Albums* Songs —
Audiobooks — — —
Searching by artist name
To Next Page
Loading...
