25 26
Preperation: Front Door
Take a hole punch and mark out the pre cut holes of the template. These will help with
precision drilling.
With the template condently in place. Use masking tape to hold it in place. You will
need to reuse this template so be sparring when taping it down.
29
30
Preperation: Front Door
With the template still in place. Use a marker to draw an oval on the back of the door
card which will be cut out for speaker clearance.
With holes marked. Pre drill your door card. 3mm and 6mm drill bits are required for
this step.
31
32
To Next Page
Loading...
