Do you have a question about the Alpine MRV-F303 and is the answer not in the manual?
Channels | 3 |
---|---|
Crossover Slope | 12 dB/octave |
Bridged RMS Power @ 4 Ohms | 150 Watts |
Frequency Response | 10 Hz - 30 kHz |
S/N Ratio | 100dB |
Input Sensitivity | 200mV - 4V |
Crossover Frequency | 50Hz - 500Hz |
Essential safety guidelines to prevent accidents, fire, and electric shock during operation.
Precautions for safe installation, wiring, and avoiding vehicle hazards.
Details on power efficiency, DC Straight technology, and built-in crossover functionality.
Instructions for mounting the amplifier and ensuring proper air circulation.
Guidelines for connecting power, ground, and audio leads, including noise prevention.
Specific advice on using hexagon screws and preparing wire leads for secure connections.
Checklist for head unit compatibility and remote turn-on lead connections.
Explanation of crossover mode, frequency adjustment, and input gain controls.
Details on input channel selection, mode settings, and output phase control.
Guidance on using Bass EQ and other selector switches for system tuning.
Diagrams for 5-channel, 4-channel, and 3-channel configurations for MRV-F353.
Wiring diagrams for MRV-F303 in 4-channel and 3-channel configurations.
Wiring diagrams for MRV-T503/MRV-T303 stereo and single-channel systems.
Diagrams illustrating speaker input lead systems for various models.
Comprehensive technical data including power output, frequency response, and dimensions.
FCC compliance, serial number recording, and manufacturer contact information.