9
12345
678910
Battery Lead (Yellow)
(5A)
(5A)
Acc (Ignition)
To the Acc power lead
To the Illumination
signal line
To the parking brake
signal line
Connect to a metal
part of chassis
body with screw
BATTERY
GPS Aerial (Included)
Ground (Black)1
Ground (Black)
Dimmer In (Illumination) (+) (White/Blue)
Parking Brake (Yellow/Blue)
Reverse (+) (Orange/White)
Mute(Pink/Skyblue)
Speed Sensor (Green/White)
Connect to VSS (Digital or Analog 0V – 3V)
*
A
A
Acc (Ignition) (Red)2
Mute (Pink/Sky blue)3
Open4
Open5
Battery (Yellow)6
Dimmer In (Illumination) (White/Blue)7
Speed Sensor (Green/White)8
Parking Brake (Yellow/Blue)9
Reverse (Orange/White)10
1
6
5
10
POWER
EX-2EX-1TO DISP.MIC/SW
GPS ANT.
To reverse lights
(+12V signal)
To the vehicle speed
pulse line
Use this to connect
a device having the
IN-INT function
Use this to connect
a device having the
IN-INT function (–)
output for Audio Mute
System expansion ports
VOLUME
MUTE
SOURCE
CVA-1000R
SET UPV.SEL
SYSTEM CONTROL
MONITOR / RECEIVER 35Wx4
TFT COLOR LCD
FUNC
R D S
EON
Yellow/Blue
(Parking Brake Input)
White/Blue
(Dimmer)
Red
(Ignition)
Yellow
(Battery)
Black
(Ground)
CVA-1000R
Optional KCE-030N
RCA to 13-Pin DIN Adaptor
Blue
(Modulator Control)
White/Brown
(Remote Output)
(White/Brown)
(White/Brown)
White/Green
(Guide Control Input)
(White/Green)
(White/Green)
Yellow/Red
(Display Control Input)
(Yellow/Red)
(Yellow/Red)
Yellow/Blue
(Parking Brake Input)
Red
(Ignition)
SYSTEM CONTROL
MONITOR / RECEIVER
CVA-1000R
DISPLAY OUTPUT
Ai-NET
VIDEO OUTPUT
AUX1
AUX1
POWER SUPPLY
(White)
(Yellow)
(White)
(Yellow)
Extension Cables
Included
Not Connected
3-3. NVE-N077P Wiring Diagram With CVA-1000R
Power Connector
Pin Configuration
* Improper connection of the
speed pulse line may cause
important safety features of
the vehicle to fail (such as
the brakes or air bags). Such
failures may result in an
accident and loss of life. We
strongly recommend that the
installation be performed by
a trained, authorized Alpine
dealer.
To Next Page
Loading...
