18-EN
Resetting the Picture Adjustment
2 Press s or t and select RESET.
3 Press or
t
o reset the picture adjustments.
• If you do not press or
within 6 seconds, OSD disappears
and the previous adjustments will not be reset.
Setting Audio & Screen
Each source has different menu. Depending on the selection of
source, setting menu changes.
• Each source can be adjustable individually.
• Adjusting should be made within 6 seconds, otherwise OSD
(On Screen Display) will be automatically turned off.
1 Press and hold SELECT for at least 2 seconds to
show the SETUP menu on Front Control Keys. Or
Press SETUP button on Remote Control.
SELECT
Front Control Keys
Remote Control
2 Press SELECT/SETUP to switch to
AUDIO&SCREEN setting menu from PICTURE
setting menu. To change each item, press s or t
.
Adjusting the Tint
2 Press s or t and select TINT.
3 Press or
to adjust the tint. Tint tone can be
adjusted from G15 (G MAX) to R15 (R MAX).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Contrast
2 Press s or t and select CONTRAST.
3 Press or
to adjust the contrast. Contrast can
be adjusted from –15 (LOW) to +15 (HIGH).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
Adjusting the Sharpness
2 Press s or t and select SHARPNESS.
3 Press or
to adjust the screen quality. Screen
quality can be adjusted from –15 (SOFT) to +15
(HARD).
4 Wait 6 seconds until OSD disappears; the
adjustment will be saved automatically.
SETUP
To Next Page
Loading...
