Need help?Do you have a question about the Alpine SEC-8028 and is the answer not in the manual?
Describes the main components and purpose of the SEC-8028 Mobile Security System.
Highlights optional features and FCC compliance.
Explains the functions of each button on the SEC-8428 remote control.
Details the purpose and behavior of the remote's LED indicator.
Instructions for arming the system using the remote control transmitter.
Instructions for automatic system arming after vehicle exit.
How to disarm the system using the remote control transmitter.
Manual disarming procedure using the disarm/valet switch.
Procedure to activate the panic alarm using the remote control.
Procedure to deactivate the panic alarm using the remote control.
Steps to activate the EXT-1, EXT-2, and EXT-3 outputs via remote.
Steps to place the system into Valet mode using the disarm/valet switch.
Steps to exit Valet mode using the disarm/valet switch.
How to turn the system's warning mode (lights and siren) ON or OFF.
How to turn the pre-warn siren chirps ON or OFF.
Enables/disables siren chirps on arm/disarm.
Configures auto lock and ignition lock/unlock delays.
Selects arming mode and sets alarm sound duration.
Lists the types of vehicle sensors used for system protection.
Describes extra protective measures like the extension LED.
Explains how the extension LED indicates which sensor triggered the alarm.
Alerts about triggered alarms and system behavior with faulty sensors.
Describes the passive arming delay timer behavior.
Explains the dual-stage impact sensor's warning mechanism.
Flashing lights, paging system, and extension LEDs.
Door lock control, security switch, and impact sensor.
Technical details for the SEC-8028 main unit.
General| Starter Kill | Yes |
|---|---|
| Panic Mode | Yes |
| Remote Start Ready | Yes |
| Remote Display | No |
| Compatibility | Universal |
| Warranty | 1 Year |
To Next Page
