English
12
Disarming
The SEC-8028 can be disarmed either by
the remote control transmitter or manually
using the disarm/valet switch.
Remote Controlled
Disarming
Press the TX button to disarm the security
system.
(The remote control LED will illuminate to
indicate that the signal is being transmit-
ted.)
Disarm/Valet Switch
Disarming
1. Enter the vehicle. The security system
will sound the siren.
2. Turn the ignition switch to the ON
position.
3. Within 30 seconds, find the Disarm/Valet
switch and turn it to the ON position.
To Next Page
Loading...
