Alpine SPE-6090 User Manual

ff#MLPINE ~
IMPORTANT NOTICE!
PLEASE READ FIRST BEFORE INSTALLING SPEAKERS
Congratulations on your purchase of high quality speakers from
Alpine. Your listening satisfaction is important to us. In order to
maximize and maintain peak speaker performance the following
guidelines are being provided. Please read this notice carefully
before operating the speakers.
1. Do not over-drive the amplifier. Over-driving the amplifier will
result in distortion or clipping and can damage any speaker.
2. Make sure gain contr-ols are properly set. (Follow
instructions in amplifier owner's manual.)
3. Make sure that the speaker is properly rated for the amplifier.
4. Make sure that volume, bass, treble, equalization or
crossover settings do not cause the amplifier to over-drive.
Failure to follow these guidelines may result in burned or damaged
speaker voice coils which will void your warranty.
If further assistance is necessary, please contact your Alpine
authorized dealer.
68-00493264-A (Y)

Alpine SPE-6090 Specifications

General

Type	Coaxial
Power Handling (Peak)	300W
Sensitivity	91 dB
Frequency Response	65 Hz - 18 kHz
Impedance	4 Ohms
Cone Material	Polypropylene
Surround Material	Rubber
Size	6 x 9 inches
Power Handling (RMS)	100W

Summary

Important Notice Before Installation

Amplifier Over-drive Warning

Do not over-drive the amplifier to prevent distortion, clipping, and potential speaker damage.

Gain Controls and Speaker Rating

Ensure proper gain controls are set and the speaker is properly rated for the amplifier.

Settings to Prevent Over-drive

Adjust volume, bass, treble, equalization, or crossover settings to prevent amplifier over-drive.

SPE-6090 Speaker Features

Technical Features Overview

High Mica PP cone, silk dome midrange, square voice coil, and long excursion design for enhanced audio performance.

External Dimensions

Detailed physical measurements of the speaker system for installation and fitment.

Installation and Wiring

Installation Procedure

Step-by-step guidelines and parts list for installing the speaker system.

Connection Diagram

Visual guide for connecting speaker wires and identifying polarity for proper audio output.

Limited Warranty Policy

Warranty Coverage and Exclusions

Details what the warranty covers (defects in materials/workmanship) and lists exclusions like misuse or shipping damage.

Obtaining Warranty Service

Procedures for requesting warranty repair, including shipping, proof of purchase, and service center contact.

Customer Service Contact

Contact information for nearest authorized service centers, support lines, and website.