Alpine UTX-M08S - Adjust Treble;Bass Level; Set Bass; Adjust the Parametric Equalizer Curve

12
Adjust Treble/Bass level
You can select Treble or Bass and adjust the level based on your own preference.
Setting item: Treble/Bass
Setting content: -7~+7 (initial value: 0)
Set Bass
Turn on/off the subwoofer
When the subwoofer is turned on, you can adjust the phase output level of the subwoofer.
Setting item: Bass
Setting content: Off/On (initial setting)
Set the phase of the subwoofer
Set the phase of the subwoofer to 0° (normal phase) or 180° (reversed phase). To adjust the phase, turn the knob.
Setting item: Bass phase
Setting content: 0° (initial setting)/180°
Set the level of the subwoofer
When the subwoofer is turned on, you can adjust the output level of the subwoofer.
Setting item: Bass level
Setting content: 0~+15 (initial value: 9)
Adjust the Parametric Equalizer curve
You can modify the equalizer settings to better fit the response curve to your preference.
1 After selecting Parametric Equalizer in the Sound Effect Settings, turn the knob to select the desired waveband, and
then short press the knob.
2 After selecting the frequency, short press the knob and turn the knob to select the frequency value.
Press to exit frequency settings.
3 Repeat step 2 and adjust the Q value and gain in the selected waveband.
Adjust the waveband
Setting content: waveband 1/waveband 2/waveband 3/waveband 4/waveband 5/waveband 6/waveband 7/waveband
8/waveband 9/waveband 10
Adjust the frequency
Adjustable frequency band:20H~20kHz
Band 1:20Hz~63Hz(31Hz)
Band 2:31Hz~125Hz(63Hz)
Band 3:63Hz~315Hz(125Hz)
Band 4:125Hz~500Hz(250Hz)
Band 5:250Hz~1kHz(500Hz)
Band 6:500Hz~2kHz(1kHz)
Band 7:1kHz~4kHz(2kHz)
Band 8:2kHz~7.2kHz(4kHz)
Band 9:5.8kHz~12kHz(8kHz)
Band 10:9kHz~20kHz(16kHz)
Adjust the Q value
Adjustable Q value range: 0.404~28.85 (initial setting: 3.056)
Adjust the gain
Adjustable gain range: -12dB~+12dB (initial setting: 0)