22-EN
X-A90V
CH-1/2/3/4 SUBWOOFER
Performance
Power Output
Per Channel, Ref.: 4 Ω, 14.4 V 75 W RMS x 4 300 W RMS x 1
Per Channel, Ref.: 2 Ω, 14.4 V 100 W RMS x 4 500 W RMS x 1
Bridged, Ref.: 4 Ω, 14.4 V 200 W RMS x 2 –
THD+N
Ref.: 10 W into 4 Ω ≤0.02% ≤0.02%
Ref.: Rated Power into 4 Ω ≤0.07% ≤0.07%
S/N Ratio
IHF A-wtd + AES-17
Ref.: 1W into 4 Ω
>87 dB >80 dB
IHF A-wtd + AES-17
Ref.: Rated Power into 4 Ω
>105 dB >104 dB
Frequency Response
+0/-3 dB, Ref.: 1 W into 4 Ω 10 Hz - 60 kHz 8 Hz - 400 Hz
+0/-1 dB, Ref.: 1 W into 4 Ω 15 Hz - 30 kHz 10 Hz - 300 Hz
Damping Factor Ref.: 10 W into 4 Ω at 100 Hz >500 >1,000
Control
Input Select
Selectable Input Signal
Configuration (2ch/4ch/6ch Input)
CH-3/4:
CH-1/2 or CH-3/4
CH-1+2+3+4
or SUBWOOFER
Input Sensitivity
RCA Input
Ref.: Rated Power into 4 Ω
Hi: 0.5 - 10 V
Lo: 0.2 - 4.0 V
Hi: 0.4 - 10 V
Lo: 0.1 - 4.0 V
Crossover
Variable HPF/LPF
HPF: 50 Hz - 400 Hz
(-12 dB/oct.)
LPF: 50 Hz - 400 Hz
(-24 dB/oct.)
Variable Subsonic –
8 Hz - 40 Hz
(-24 dB/oct.)
Equalizer Bass EQ (fc=50 Hz) –
0 to +12 dB
(Variable)
Remote Level* Linear Attenuation – 0 to -20 dB
General
Input Impedance >10 kΩ
Dimensions
Width 297 mm (11-3/4”)
Height 50.8 mm (2”)
Depth 192 mm (7-5/8”)
Weight 3.3 kg (7 lb 4 oz)
* Requires optional RUX-KNOB or RUX-KNOB.2.
NOTES:
• Specifications and design are subject to change without notice.
• To play back high res sound sources, it is necessary to make all the audio systems High-resolution audio
compatible devices.
To Next Page
Loading...
