Alpine MRV-F400 - User Manual

OWNER’S
MANUAL/BEDIENUNGSANLEITUNG/
MANUEL
DU
PROPRIETAIRE/MANUALE
DEL
PROPRIETARIO/
MANUAL
DEL
PROPIETARIO/BRUKSANVISNING
MRV-F400
4/3/2 Channel Power Amplifier
romney LB)
aie tS
towowa, ST 12 OFF WP OP
MMAP INE yrur Moot Loreen
4r2 CHANNEL U CHANNEL 172.
POWEH AMPLIFIER
MRV-€400

Alpine MRV-F400 Specifications

General

Channels	4
Frequency Response	10Hz - 50kHz
THD at Rated Power	0.08%
Crossover Slope	12 dB/octave
Input Sensitivity	0.2 - 4.0V
Crossover Frequency	50Hz - 400Hz
Bass EQ	12dB @ 50Hz
Crossover	LP/HP
RMS Power @ 4 Ohms	100W x 4

Summary

Installation and Connections Overview

Installation Procedure

Details the process and considerations for installing the amplifier, including diagrams.

Connection Guide

Provides an overview of the amplifier's input and output connections with diagrams.

Amplifier Features

Built-in Crossover Network

Details the adjustable crossover for high-pass or low-pass filtering.

Switches and Terminals Identification

Precautions and Safety

General Safety Warnings

Provides critical warnings about wiring, power, and fuse replacement.

Connection Best Practices

Noise Prevention Techniques

Wiring the Amplifier

Battery and Remote Turn-On Leads

Covers connecting the power supply and remote turn-on leads.

Wiring Details and Diagrams

Ground Lead Connection

Provides instructions for securely connecting the ground lead.

Remote Turn-On Lead Scenarios

Handling Head Unit Compatibility

Addresses scenarios where head unit remote turn-on leads require special connections.

Amplifier Installation Procedure

Mounting and Grounding Steps

Outlines the steps for physically mounting the amplifier and securing the ground.

Switch Settings Guide

Advanced Switch Settings

Technical Specifications

Power Output Ratings

Lists the RMS and dynamic power output across different impedances.

Frequency Response and Noise Levels

Performance Characteristic Curves