Need help?Do you have a question about the Alpine MRV-F545 and is the answer not in the manual?
General| Channels | 5 |
|---|---|
| THD | 0.08% |
| Crossover Slope | 12dB/octave |
| Input Sensitivity | 200mV - 4V |
| Signal-to-Noise Ratio | 100dB |
| Bass EQ | 0 to +12dB |
Introduction to the manual for maximizing enjoyment and future reference.
Lists included accessories for the amplifier.
Important warnings regarding driving safety, volume, and unit handling.
Guidelines for safe wiring, installation, and handling of the unit.
Step-by-step guide on physically installing the amplifier in a vehicle.
Important notes on ensuring a proper ground connection to minimize noise.
Instructions for safely connecting the power supply terminal to the unit.
Safety tips for connecting power supply wires to prevent short circuits.
Basic instructions for connecting audio components and the power lead.
Methods to prevent external noise interference in the audio system.
Details on connecting speakers, including stereo and bridged modes.
Explains RCA input jacks and Pre-Out jacks for audio signal connection.
Information on connecting multiple amplifiers via the Amplifier LINK system.
Guidelines for safely connecting wires, including wire size and insulation stripping.
Instructions on using screws and tools to securely fix wire connections.
Checklist for head unit's remote turn-on and power antenna lead compatibility.
Describes alternative methods for connecting the remote turn-on lead.
Step-by-step guide on removing and reattaching the amplifier's top cover.
Explains crossover modes, frequency adjustment, and multiplication settings.
Explains how to select input channels for different audio configurations.
Guide on setting a unique ID for multiple amplifiers connected via LINK.
Instructions for adjusting input level and Bass EQ settings for optimal sound.
How to display the set crossover frequencies for CH 1/2 and CH 3/4.
How to switch between displaying voltage and temperature readings.
Lists common problems (HOT, TEM, VLT, CUR) and their causes/solutions.
Wiring diagrams for 4-channel and 3-channel amplifier system setups.
Diagrams for Amplifier LINK system and info for home theater use.
Detailed technical data including power output, frequency response, and dimensions.
Important notices regarding product service and warranty terms.
Details what is covered, not covered, and limitations of the warranty.
Instructions on how to get warranty service and contact customer support.
To Next Page
