Alpine MRV-M1200 User Manual

ALPINE MRV-M1200 68-29530Z91-A (EN/FR/ES)
EN
FR
ES
FOR CAR USE ONLY/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES
• OWNER’S MANUAL
Please read before using this equipment.
• MODE D’EMPLOI
Veuillez lire avant d’utiliser cet appareil.
• MANUAL DE OPERACIÓN
Léalo antes de utilizar este equipo.
ALPINE ELECTRONICS MARKETING, INC.
1-7, Yukigaya-Otsukamachi, Ota-ku,
Tokyo 145-0067, JAPAN
Phone: 03-5499-4531
ALPINE ELECTRONICS OF AMERICA, INC.
19145 Gramercy Place, Torrance,
California 90501, U.S.A.
Phone 1-800-ALPINE-1 (1-800-257-4631)
ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.
161-165 Princes Highway, Hallam
Victoria 3803, Australia
Phone 03-8787-1200
ALPINE ELECTRONICS GmbH
Wilhelm-Wagenfeld-Str. 1-3,
80807 München, Germany
Phone 089-32 42 640
ALPINE ELECTRONICS OF U.K. LTD.
Alpine House
Fletchamstead Highway, Coventry CV4 9TW, U.K.
www.alpine.co.uk
ALPINE ELECTRONICS France S.A.R.L.
184 allée des Erables
CS 52016 – Villepinte
95 945 Roissy CDG cedex
FRANCE
Phone : + 33(0)1 48 63 89 89
ALPINE ITALIA S.p.A.
Viale Cristoforo Colombo, 8
20090 Trezzano sul Naviglio MI, Italy
Phone +39 02 484781
ALPINE ELECTRONICS DE ESPAÑA, S.A.
Portal de Gamarra 36, Pabellón, 32
01013 Vitoria (Alava)-APDO 133, Spain
Phone 945-283588
MRV-M1200
MONO POWER AMPLIFIER
JEIL Moon Hwa Co.
18-6, 3Ga, Pil_dong, Jung_gu, Seoul, Korea
Designed by ALPINE Japan
Printed in Korea
68-29530Z91-A (Y-A5)
M3514596010

Alpine MRV-M1200 Specifications

General

Crossover Slope	12 dB/octave
RMS Power @ 2 Ohms	1200 Watts
S/N Ratio	100dB
Input Sensitivity	0.2V - 4V
Crossover Frequency	50 Hz - 400 Hz, Variable
Bass EQ	0dB - 12dB

Summary

General Safety Warnings

Points to Observe for Safe Usage

Read this manual carefully before using the system components. Alpine cannot be responsible for problems resulting from failure to observe instructions.

Driving Attention and Volume Control

Do not operate functions that take attention away from driving. Keep volume low enough to hear outside noises.

Operation and Modification Precautions

Do not disassemble or alter the unit. Avoid blocking vents. Ensure correct connections and use 12V negative ground.

Amplifier Installation Guide

Mounting and Drilling

Instructions for marking, drilling screw locations, and securing the amplifier to the vehicle chassis.

Wiring and Connection Procedures

Speaker and Power Connections

Switch and Control Settings

Input Gain Adjustment

Product Specifications

Performance Metrics

Detailed performance specifications including power output, THD+N, S/N ratio, frequency response, and damping factor.

Control and General Features

Specifications for input sensitivity, crossover, equalizer, remote level, input impedance, preamp output, dimensions, and weight.