Need help?Do you have a question about the Alpine MRV-1507 and is the answer not in the manual?
Visual guide showing how components are assembled and packaged.
Procedure to adjust the power supply voltage levels of the amplifier.
Procedure for adjusting the amplifier's idling current or voltage.
Visual guide showing how components are assembled and packaged.
Procedure to adjust the power supply voltage levels of the amplifier.
Procedure for adjusting the amplifier's idling current or voltage.
General| RMS Power @ 4 Ohms | 150W x 1 |
|---|---|
| Frequency Response | 10 Hz - 30 kHz |
| THD+N | 0.03% |
| Channels | 1 |
| RMS Power (4 Ohms) | 150W x 1 |
| RMS Power @ 2 Ohms | 300W x 1 |
| S/N Ratio | 100dB |
| RMS Power (2 Ohms) | 300 watts |
| Signal-to-Noise Ratio | 100dB |
| Input Sensitivity | 0.2V - 4V |
To Next Page
