Alpine X009-WRA - User Manual

Jeep Wrangler
WRANGLER  1/13
Jeep Wrangler
X009-WRA 9”
Installation Manual
 Model: Wrangler
 Model Year: 2011-UP
Introduction
Design and specications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by the store that you purchased it from.
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
Jeep
Model Year
Wrangler 2011 - UP
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.

Summary

General Safety Precautions

Action Indicators and Critical Warnings

Defines symbols and covers critical safety rules like no disassembly, correct fuses, and grounding.

Handling and Installation Safety

Addresses safe storage of small parts, avoiding driver obstruction, and preventing vehicle damage.

Specific Installation Precautions

Vehicle Component and Wiring Safety

Warns against using certain bolts for grounding, installing near airbags, and proper cable management.

Environmental and Accessory Use

Advises against blocking vents and ensures correct accessory attachment.

Component Placement Guide

Factory Unit Disassembly

iDatalink Maestro Module Setup

Weblink Software Installation and Registration

Module Programming Procedure

Main Installation Steps

Dash Panel Modification

Dash Panel Trimming

Explains the necessary trimming of the factory dash panel for bezel fitment.

Panel Reinstallation

Head Unit Installation

System Wiring Diagram

iDatalink Maestro and Main Harness Wiring

Shows the detailed wiring connections for the Maestro module and main harness.

Head Unit and Accessory Wiring

Alpine X009-WRA Specifications