USER MANUAL / ENGLISH
16 ADDITIONAL INFORMATION
PRODUCT DESCRIPTION SPECIFICATIONS
Type: ALPRIDE E2 AIRBAG system backpacks
Operating Temperature: - 30°C / + 40°C
IP65 conform controller
Patent No: EP3202462
Weight of complete E2 SuperCap kit (without batteries): 1 140 g +/- 10 g
Airbag balloon volume : 162 liters
Total volume of the complete airbag kit in backpack: 1,8 litres
Micro-USB-C: 5 V – 3A DC
Batteries: 2 batteries AA / R6 / UM3 1.5 V Alkaline or Lithium
Certification: CE according to EN 16716 standards set by TÜV Süd GmBH
Model: ALPRIDE E2
SERVICE CENTER
The ALPRIDE E2 AIRBAG system customer service center for the different countries are listed under our website: www.alpride.com
17 SALES & HOMOLOGATION
SALES
Responsible for the development and commercialization in the EU and worldwide is:
ALPRIDE SA, Chemin des Chômeurs 2, 2523 Lignières, Switzerland
All information related to importers is available at www.alpride.com
HOMOLOGATION
All declarations of conformity are available at www.alpride.com
Tested by TÜV Süd Product Service GmbH, Daimlerstr. 11, 85748 Garching bei München, Germany. Prüfstellennummer 0123.
Certified according to: EN 16716: 2017
The Alpride avalanche backpacks comply with the provisions and safety requirements of the European Standard EN 16716: 2017 for Mountaineering
equipment – Avalanche airbag systems – Safety requirements and test methods.
All homologated backpacks are labelled with corresponding seals indicating they have passed the official tests. They are affixed in plain sight and
may not be removed.
The labels contain the following
Name of the model of the product.
Warning ! The end user should carefully read the instruction before using the product (PPE).
Manufacturing date : Year-Month / Individual serial number.
The CE marking ensures compliance with the essential requirements of Regulation EU 2016 / 425.
Eurasian Conformity Mark.
UKCA Certification.
The EU declaration of conformity can be accessed on www.alpride.com
Reference for Personal Protective Equipment that is in compliance with the European
harmonized technical standard used in the design and CE certification.
WWW.ALPRIDE.COM
ALPRIDE SA 2021. All rights reserved. Rev. 01 of 06.2021. The information contained in this manual is in various languages
but only the English version will be relevant in case of conflict.
XXXXXX
EN16716:2017
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
14
To Previous Page
Loading...