What to do if the Alpride Sports & Outdoors airbag doesn’t inflate when pulling the trigger?
If the Alpride Sports & Outdoors airbag doesn't inflate when you pull the trigger, first check if E2 is on by checking the LED. Next, verify if the supercapacitors are adequately charged, indicated by an orange or green LED. Finally, confirm that the autotest is successful by checking the LED.
General| Type | Electronic Avalanche Airbag |
|---|---|
| Volume | 150L |
| Activation | Electronic Trigger |
| Power Source | Supercapacitor |
| Certification | EN16716 |
| Activation Time | 3 seconds |
| Weight | 1.1 kg (without cartridge) |
| Number of Inflations | 2-3 (full charge) |
Details the two methods for recharging SuperCapacitors: AA batteries and USB-C.
Guides on adjusting the trigger handle height on the shoulder strap for optimal placement.
Outlines points to observe for regular checks and maintenance of the backpack.
Recommended checks after using the system in an avalanche.
To Next Page