Alsina ALSIPERCHA - Disassembly and Transport; Product Folding for Storage or Transport

6490009ENLZ / 6790009ENLZ
►
12
◄
Al
sipercha with housing tube Alsipercha System
Disassembly Process
The system is folded when packing it away for storage or moving.
There is no need to dismantle its components as they remain attached
at all times. The affected areas must be delimited for this task in order
to prevent parts from falling suddenly and unexpectedly.
Folding the product for storage or transport
Warning . NEVER fold the product from its erect position of
use, because it may cause injury.
Fold the product in the following order:
- Remove the boat hook accessory from the Alsipercha and place it on
the ground or on a stable surface.
- Remove the Alsipercha from its connection support using auxiliary
equipment and place it in a horizontal position on the ground or on a
suffi ciently stable surface.
- Remove the retractable system connected to the upper horizontal
tube.
- Remove the diagonal tube connection pin from the upper tube.
- Fold the diagonal tube until it attaches to the main mast.
- Fold the upper horizontal tube in the same direction as the previous
one, attaching it to the diagonal tube.
- Insert the safety pin, making sure that the three tubes are perfectly
joined and that the safety pin fastens the three tubes.