Alstom Drive Data Manager ALSPA MV3000 - Page 4

ALSPA MV3000 Drive Data Manager™ Lead/Mounting Kit
Instruction Sheet T1916EN Rev. 0002 (07/00)
Page 4 of
of of
of 8
• Fit the lead to the Drive Data Manager™.
• Pass the other end of the lead through
the 35mm diameter hole in the
enclosure.
• Using the M4 x 8 screws and spring
washers provided, secure the Drive
Data Manager™ to the enclosure as
shown opposite.
• Tighten the screws to compress the
seal.
Continued….