Introduction
This guide is designed to provide the information needed to mount A8n
(ac) Series Super WiFi Base Station (BTS) at the site location. A8n (ac)
series contains 3 variants:
i) A8n (ac): contains A8n (ac) base station plus 4 external 2.4GHz
14dBi sector antennas. Each sector antenna can be adjusted
with different directions and tilt angles.
ii) A8-Ein (ac): integrated base station, multi-beam 2.4GHz 19dBi
antenna array for 80 degree sector coverage.
iii) A8in (ac): integrated base station, 14dBi antennas and RF
cabling optimized for long range 360-degree access coverage.
It is assumed in this document that a site survey has been performed
before the site installation. The appropriate antenna pole and BTS
locations have been selected. It is a good practice to have a
document consists of a map and drawing illustrating the base station
and poles locations, antenna bearing/down-tilt, antenna height, etc…
A planning on IP network is also an important issue for network
planning.
To Next Page
Loading...