Altec Lansing The Jacket IMW455 - Speaker Operation; Powering Your Speakers ON & OFF; Power Saving Mode

Powering Your Speakers ON & OFF
1. Press and hold the “POWER” button for 2 seconds to turn on the unit. The Bluetooth LED light will start
blinking slowly. Now you can ready to pair your audio source with your IMW455 speaker.
2. Press and hold the “POWER” button for 2 seconds to turn off the unit.
Power Saving Mode
The iMW455 will enter a power saving mode if no audio is played for 30 minutes. Press and hold power button
for two seconds to wake the iMW455.